RIK → DWG · Windows

Convert RIK to DWG

RIK to DWG for whole archives of tiles, layers or survey files at once, with nothing uploaded and no account required.

Batch RIK to DWG conversion doesn't have to be complicated. reaConverter processes entire folders with consistent quality settings. Works offline with no internet required, so you can convert anywhere, anytime. Handles whole folders of tiles and layers in one run, with identical settings on every file.

DownloadRIK to DWG ConverterConvert
RIK to DWG
Online
.rik.DWG
4.8

Converting files since 2001

Runs offline — nothing uploaded

Read what our users say →

How to Convert Multiple .rik Files to .dwg?

1. Download and Install reaConverter

Download reaConverter and install it in seconds. The setup is straightforward — no complex configuration, no extra software required.

reaConverter logo
Install reaConverter

2. Load your RIK files

Launch reaConverter and load the RIK files you want to convert. Add a few files or thousands, batch processing handles them all.

Drag files into the window, use the Add Files button, or select entire folders.

Load your RIK files into reaConverter

3. Select DWG as output format

Select DWG as target format and pick where to save results. You can keep default settings or fine-tune the output.

Select DWG as output format

4. Start RIK to DWG conversion

Hit Convert to process your files. The log window shows progress, timing, and status for every file.

Start Conversion

Conversion complete? Your DWG files are saved to the destination folder, ready to use.

Step by step

How It Works

reaConverter offers the fastest, simplest solution for converting your RIK files into DWG without GIS software - all files processed on your PC for maximum privacy and speed.

Download reaConverter

Technical note

Before you convert RIK to DWG

Geospatial coordinates are absolute positions on the earth, and they are large: a projected easting runs to six or seven digits, while latitude and longitude are small decimals. DWG expects a drawing laid out near its own origin in millimetres or inches. The geometry itself converts correctly, but it can land tens of kilometres from 0,0, or arrive at a scale where an entire county is forty units across. Zoom to extents first, then measure one known distance before dimensioning anything. An RIK file has a pixel count and a DPI value, and no real-world size at all. DWG is a drawing where one unit means one millimetre or one inch, so the conversion has to assign a scale. Set the DPI before the run rather than resizing afterwards, then measure one feature of known length in the output and scale the drawing once to match it. Everything downstream, from dimensioning to cutting, rests on that single check.

Map Data Workflow

From map data to a working drawing

Converting RIK to DWG usually means handing GIS data to someone who works in CAD. reaConverter makes that hand-off without a GIS seat on either side, for one layer or a whole delivery.

  • Convert every layer in a folder to DWG with the same settings
  • Go the other way too, from DWG to Shapefile, when the GIS team needs the drawings back
  • Render the same data to PDF for a quick review copy
  • Pick up new data automatically with Watch Folders, or script the job from the command line

Everything runs on your PC, which matters for cadastral, utility and client data that should not pass through an upload form.

GIS data conversion

User reviews

What people say after the first batch

Average User Rating:4.8
Last updated on September 13, 2026
The proliferation of niche formats like DWG creates unnecessary hurdles. After wasted hours on forums, I discovered this lean converter that delivers single-purpose excellence—precisely the 'no nonsense' solution CAD beginners require.
Rajiv P. Patel
Rajiv P. Patel
Satisfied Customer
Thank you so much for this incredibly detailed guide! When I needed to convert DWG to PDF, I expected to spend hours figuring it out—but your step-by-step instructions had me done in just 5 minutes flat. This saved me a ton of time and frustration!
Michelle Lee
Michelle Lee
Satisfied Customer
My son is training to become an architect, so he's learning Autodesk, AutoCAD, and other design software. With so many file formats in this field, we needed a reliable conversion tool fast. reaConverter was the perfect solution - lightning-fast conversions, zero lag, and it works completely offline!
Jerry Morris
Jerry Morris
Satisfied Customer
I needed to convert DWG to DXF for a laser cutter, and reaConverter did it flawlessly. The geometry remained intact, and the line weights were preserved. I've tried free tools, but they always mess up arcs. This is the only one I trust.
Sarah W.
Sarah W.
Product Designer
I previously used a similar program that stopped working, so I needed to find a replacement. reaConverter turned out to be the perfect solution—after reviewing the instructions on this page, I was able to convert DWG files immediately.
Jason Chen
Jason Chen
Satisfied Customer
When I switched from Mac to Windows, I couldn't open my old DWG files. reaConverter saved me – it converted them all to PDF and JPG with perfect scaling. Now I can view my CAD portfolio on any device. Thank you for making cross‑platform work possible!
David O.
David O.
Satisfied Customer

FAQ

RIK to DWG Conversion

What are RIK files?

RIK is a raster map format used for digital maps issued by Lantmäteriet, the Swedish national mapping, cadastral, and land registration authority. A file of this type holds a map as a picture, in which each point is one of up to 256 colors, together with the information needed to place it on the ground in the Swedish national grid. The format exists in three versions, and files of all of them are found in collections of Swedish topographic and general maps, which were distributed on discs and used in navigation programs, hiking and orienteering software, and ordinary mapping systems. Because it is a specialized national format, ordinary image viewers cannot open it, and conversion is the practical way to use such maps elsewhere.

What are DWG files?

DWG (which stands for "Drawing") is a proprietary format of AutoCAD, a program widely used for creating engineering and architectural projects. The format is also a default extension used by several other computer-aided design (CAD) pieces of software, including IntelliCAD, Caddie or DraftSight. DWG files contain complex design structures including several layers, which can be 2-dimensional or 3-dimensional.

Can reaConverter convert RIK to DWG?

Yes! reaConverter instantly converts .rik to .dwg with perfect quality preservation. With its batch processing feature, you can convert multiple files at once in just a few clicks. You can even convert images directly from Windows Explorer using the right-click menu — fast and convenient.

What is reaConverter used for?

reaConverter is a Windows converter for 800+ formats, GIS data among them. For RIK to DWG it replaces the usual detour through QGIS, ArcGIS or ogr2ogr: add the files, pick the output format, and the whole batch converts offline. Surveyors, planners and engineering teams use it to pass data between GIS, CAD and everyday document formats.

Why choose offline conversion with reaConverter?

reaConverter is a software program that is used for offline files conversion. Your proprietary documents never leave your computer – essential for architects, engineers, healthcare and government contractors handling classified projects. Meets GDPR, HIPAA, CCPA, and corporate security policies by ensuring files never cross borders or third-party systems.

Can I convert RIK to DWG online?

If you only need to convert a few RIK files to DWG format, feel free to try our free online free online RIK to DWG converter — perfect for small batches with no installation needed!

How can I turn RIK files into DWG on my computer?

The best way to change RIKs to DWGs on your PC is to install a quality piece of software, such as reaConverter. This software is extremely efficient in managing a wide range of batch files conversions, including conversion from RIK to DWG.

How can I automate RIK to DWG files conversion?

reaConverter supports all the most useful automation features such as right-click сonversion and Watch Folders for the most efficient automated files conversion in any software of this type.

Is there a way to convert RIK files to DWG using the command prompt?

reaConverter provides full access to all its features via Windows command line, including a high-performance command-line rik to dwg converter for batch processing.

What else can I do with reaConverter?

Convert whole-slide imagesResize picturesConvert PDF filesAdd watermark on photoTrace images to vector

Related conversions

Other ways to convert RIK files, and other sources that convert to DWG.

RIK to TIFRIK to PNGRIK to JPGKML to DWGKMZ to DWGCDF to DWG
All RIK conversionsAll DWG conversions

Discover More

Beyond format conversion

Batch conversion, editing, and processing across 800+ formats, from RAW and HEIC to DICOM, DWG, and PDF. Everything runs locally, with no cloud and no upload limits.

DownloadreaConverterPurchase

Free trial · Windows 10/11 · v8.0.250 · Files never leave your computer

reaConverter software